07-31-2008 05:22 AM
Hi,
My iPhone can establish a isakmp session and get an IP address etc with my IOS 12.4 VPN on a cisco 2811.
However, when I try and pass traffic, the phase 2 ipsec connection terminates the tunnel.
I get error like
IPSec policy invalidated proposal
Jul 31 13:13:32.590: ISAKMP:(0:791:HW:2): phase 2 SA policy not acceptable!
and also
CRYPTO-6-IKMP_MODE_FAILURE: Processing of Quick mode failed with peer at
Has anyone got an iPhone 2.0 to work with a 2811 ?
It does work with an ASA (not sure which model though)
Thanks
Solved! Go to Solution.
07-31-2008 06:51 PM
Have a look at this:
http://discussions.apple.com/thread.jspa?messageID=7221787㈛
"Which Cisco platforms work with the Cisco VPN Client on the iPhone?
Cisco ASA 5500 Security Appliances and PIX Firewalls. We highly recommend the latest 8.0.x software release (or greater), but you can also use 7.2.x software.
Neither Cisco IOS VPN routers nor the VPN 3000 Series Concentrators support the iPhone VPN capabilities. "
Regards
Farrukh
07-31-2008 06:51 PM
Have a look at this:
http://discussions.apple.com/thread.jspa?messageID=7221787㈛
"Which Cisco platforms work with the Cisco VPN Client on the iPhone?
Cisco ASA 5500 Security Appliances and PIX Firewalls. We highly recommend the latest 8.0.x software release (or greater), but you can also use 7.2.x software.
Neither Cisco IOS VPN routers nor the VPN 3000 Series Concentrators support the iPhone VPN capabilities. "
Regards
Farrukh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide