iPhone 2.0 & 2811 IOS VPN

[shahedvoicerite]

Hi,

My iPhone can establish a isakmp session and get an IP address etc with my IOS 12.4 VPN on a cisco 2811.

However, when I try and pass traffic, the phase 2 ipsec connection terminates the tunnel.

I get error like

IPSec policy invalidated proposal

Jul 31 13:13:32.590: ISAKMP:(0:791:HW:2): phase 2 SA policy not acceptable!

and also

CRYPTO-6-IKMP_MODE_FAILURE: Processing of Quick mode failed with peer at

Has anyone got an iPhone 2.0 to work with a 2811 ?

It does work with an ASA (not sure which model though)

Thanks

[Farrukh Haroon · Accepted solution]

Have a look at this:

http://discussions.apple.com/thread.jspa?messageID=7221787㈛

http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/iPhone/2.0/connectivity/guide/iphone.html

"Which Cisco platforms work with the Cisco VPN Client on the iPhone?

Cisco ASA 5500 Security Appliances and PIX Firewalls. We highly recommend the latest 8.0.x software release (or greater), but you can also use 7.2.x software.

Neither Cisco IOS VPN routers nor the VPN 3000 Series Concentrators support the iPhone VPN capabilities. "

Regards

Farrukh