Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ipsec and l2tp over ipsec vpn working together

Hi Dears. I configurate ipsec(remote) vpn and l2tp over ipsec vpn at asa. i test it each vpn are working.  but i want both of them are working

as you know i can apply only one crypto map to interface. so i must be write the dynamic maps to the one crypto map.

i test it the result is the sequence number is low dynamic-map vpn connect but i want to connect both of them.

what is problem??

this is my config:

crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac

crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport

crypto ipsec transform-set aes128sha esp-aes esp-sha-hmac

crypto ipsec transform-set aes128sha mode transport

crypto ipsec transform-set aes256sha esp-aes-256 esp-sha-hmac

crypto ipsec transform-set aes256sha mode transport

crypto ipsec transform-set RA-TS esp-3des esp-md5-hmac

crypto ipsec security-association lifetime seconds 28800

crypto ipsec security-association lifetime kilobytes 4608000

crypto dynamic-map DYN_MAP 10 set transform-set RA-TS

crypto dynamic-map DYN_MAP 10 set reverse-route

crypto dynamic-map out_dyn_map 10 set transform-set TRANS_ESP_3DES_MD5 aes128sha aes256sha

crypto map VPN_MAP 29 ipsec-isakmp dynamic out_dyn_map

crypto map VPN_MAP 30 ipsec-isakmp dynamic DYN_MAP

crypto map VPN_MAP interface outside

1 REPLY
New Member

ipsec and l2tp over ipsec vpn working together

please help me.

327
Views
0
Helpful
1
Replies