I have a DMVPN network with 4331 hub routers. Our HQ in Memphis has a hub on AT&T, and another on Lumen. Our New York hub is also a Lumen connection. All are 500Mb up/down. We have about 35 spokes around the US that peer to all 3 routers. BGP is the ...
Forum Posts
I need to upgrade AnyConnect 4.10 because it is EOS on 3/31/24. The replacement product is Secure Client 5.x. Currently, users only have DART and NAM installed on their computers.1. Do I need to uninstall AnyConnect 4.10 or is that automatically do...
Hi, I have one issue with IPSec tunnel Lan-to-Lan between ASA 5525x (v9.8) and ASA FPR 2110 (v9.16). My Tunnel is up but ping between each client was not successful. Both peer status sh cry isakmp sa in "MM_ACTIVE".I ran packet-tracer icmp between pe...
Hi Guys,We're having some issues since deploying the AnyConnect VPN with users reporting poor call quality and packet loss on Microsoft Teams and over Skype both audio and video calls?Is there anything we can try or tweak on our ASA and AnyConnect se...
We have clients receiving a "PKCS12 (PFX) without a supplied password" error while connecting to RAVPN using Cisco Secure Client (5.1.2.42). The headend device is FTD 3130.The full error is "There was an erro during initialization: PKCS12 (PFX) witho...
Anyconnect has been uninstalled on my Mac. I have been having issues with network connections so I ran "systemextensionsctl list" in Terminal. When uninstalling anyconnect it looks like the "com.cisco.anyconnect.macos.acsockext" Socket Filter Extensi...
Hello,When configuring SSL VPN, the default encryption type is "ssl server-version tlsv1.2 dtlsv1.2", which only shows up with a "show run all". In that output, I can also see that "ssl cipher tlsv1.2 medium" and "ssl cipher dtlsv1.2 medium" are disp...
Hello, any help appreciated.I am having issues when trying to assign a different group policy to a user where the group policy contains a different client profile (XML) to the one used to connect in the first instance. This is what I am trying to do....
When a client connect to the HQ via AnyConnect vpn, they can access the HQ local subnet, but can´t access the subnet at the remote office, that has an site-to-site connection to the HQ.Can this be configuret via the Cisco Firepower gui?Cisco Firepowe...
ive just implemented cisco duo for anyconnect on my asa. some users are experiencing getting multiple 2FA requests on their phones back to back instantly sometimes 3 request, my timeout is 60 secs set on the ASA and my max failed attempts is 3. is th...
Hello, I recently installed Secure Client 5.1.2.42 on Win11 23H2 (HU language). Setup was OK, I received no error.After starting the client, the application didn't start, the appl. log shows me the this:The name of the modul, which occured the proble...
Hello everyone!Tunnel1 - destination tunnelTunnel2 - source tunnelsource_IP - ip of the source router (branch router)dest_IP - ip of the destination router (main router) I am getting anti-replay errors, logs are collected on the main router*Apr 15 04...
I have 4 locations that have a site to site tunnel back to our main office.occasionally, someone on one of the remote networks will VPN in with AnyConnect, and basically cause a network loop that brings a majority of the network at the remote site do...
Hello Guys,We have a IKEv2 VPN between Palo Alto FW and Cisco 1121 IOS XE router and below is the Cisco side config. When I initiate traffic towards Cisco end's LAN gateway 172.22.120.1, the tunnel doesnt come up (Phase 1), while it works in the reve...
Due to Covid-19 we are working from home by connecting to office VPN. Since yesterday entire office was asked to WFH and since then we got some intermittent disconnection issues. Issue - from home connecting to Cisco VPN is ok, but once connected ...
