Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ipsec nat-transparency not always working ios 12.4(13b)

with 2800 (as spokes) and 3745 routers, both having 12.4(13b), ipsec udp-nat-traversal is not always choosen between the vpn-peers. effect: sas are setup but with no traffic going through.

on the hub-site there is a NAT-situation!

curious: only having this problem on one hub site. Any ideas?

1 REPLY
Silver

Re: ipsec nat-transparency not always working ios 12.4(13b)

This incompatibility applies only when IP addresses are used as a search key to find a preshared key. Modification of the IP source or destination addresses by NAT or reverse NAT results in a mismatch between the IP address and the preshared key.

http://www.cisco.com/en/US/docs/ios/12_2t/12_2t13/feature/guide/ftipsnat.html#wp1035671

175
Views
0
Helpful
1
Replies
CreatePlease login to create content