Cisco Support Community
Community Member

IPsec Remote VPN with VPN client 5.0.07 using ASDM wizard


I am setting up IPsec remote VPN for ASA 5505 using ASDM wizard and want to use VPN client for client machines. I have follwing questions:

My inside network IP and outside IP

1. what is POOL ip for step 6 for ASDM Ipsec wizard?? which range I should put??

2. for VPN client: what I should put for Host IP and group authentication username and password??

Please advise or provide me any link for help.

I want help for setting up both VPN client and ASA using ASDM wizard.

please help.



Hall of Fame Super Silver

IPsec Remote VPN with VPN client 5.0.07 using ASDM wizard

The pool is a group of internal addresses you can assign to your remote users from the ASA. Often is it picked from available addresses on the ASA inside interface subnet but it can also be a distinct subnet (or set of subnets - up to 6).

The VPN client would use the ASA outside IP address as the "host IP". Group authentication and password is whatever you setup in the wizard on the ASA. You have two levels of authentication - the group and the individual user. You need to supply both on the client setup (once you put the group authentication username and password it can be saved with the pcf profile file).

CreatePlease to create content