I have got ASA 5510 with 7.0 Version. i created a IPSEC site to site vpn,NAT & Access list is configured. when i ping, i can see IKE tunnel 1 on asdm n then i get an error of QM FSM and it gets disconnect....
I have done the configuration through ASDM only.How can i define these strings as this configuration i recive from the other side,
ISAKMP lifetime (phase 1)= 1440 minutes
SA (phase 2)= 7200 seconds
Can anyone help to me solve this issue and i wanna do it through ASDM.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...