07-03-2013 03:29 PM - edited 02-21-2020 07:00 PM
Hello
I have been trying to find the configuration guides for a cat4500e-universalk9.SPA.03.04.00.SG.151-2.SG, with entservices license.
We have an immediate requirement to build a HA IPSEC VPN from two 4507RE switches, while we wait for new ASA's to be provisioned. I don't think we can do it, in HA setup.
Advice is very welcome.
Thanks
Nick
Solved! Go to Solution.
07-03-2013 11:50 PM
Nick,
IPsec is not supported at all on cat4500 platform.
We're working on removing IKE/IPsec commands from new parser in IOS XE:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCuh60386
M.
(Editted typos)
nicholas boran wrote:
Hello
I have been trying to find the configuration guides for a cat4500e-universalk9.SPA.03.04.00.SG.151-2.SG, with entservices license.
We have an immediate requirement to build a HA IPSEC VPN from two 4507RE switches, while we wait for new ASA's to be provisioned. I don't think we can do it, in HA setup.
Advice is very welcome.
Thanks
Nick
07-03-2013 11:50 PM
Nick,
IPsec is not supported at all on cat4500 platform.
We're working on removing IKE/IPsec commands from new parser in IOS XE:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCuh60386
M.
(Editted typos)
nicholas boran wrote:
Hello
I have been trying to find the configuration guides for a cat4500e-universalk9.SPA.03.04.00.SG.151-2.SG, with entservices license.
We have an immediate requirement to build a HA IPSEC VPN from two 4507RE switches, while we wait for new ASA's to be provisioned. I don't think we can do it, in HA setup.
Advice is very welcome.
Thanks
Nick
07-04-2013 02:11 AM
Thanks for the prompt response Marcin. Will look at other options.
Nick
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: