07-13-2008 11:17 PM - edited 02-21-2020 03:49 PM
Hi,
I have main office " A " where I have a PIX 525 with 3DES and DES enabled,and then I have two other branches " B " and " C ".at "B" I have a PIX 525 with 3DES and DES enabled,and at "C" I have PIX 525 with only DES enabled.
Now I am trying to create IPSec tunnel between "A" to "B" with 3DES and IPSec between "A" to "C" with DES
Is it possibe?Means from a PIX525 (3DESand DES enabled) is it possibe to create a IPSec tunnel between two other site with one site 3DES and with another site DES.
Please send me the link.
Thanks and Regards,
S.Venkataraman.
07-14-2008 12:19 AM
right way is to get 3DES license, it's free...
http://www.cisco.com/go/license
if one has 3DES,DES and another has got only DES, then you can build a DES ipsec tunnel.
[Pls RATE if HELPS]
07-14-2008 01:26 AM
Hi Aleskseev,
Yea,you are correct,One IPSec tunnel is 3DES to 3DES the other one is 3DES to DES.Is this possible?
Thanks and Regards,
S.Venkataraman.
07-14-2008 01:35 AM
Yes, you can create IPSec tunnel between "A" to "B" with 3DES encryption and IPSec between "A" to "C" with DES encryption.
But better way is to obtain a 3DES license.
07-14-2008 01:44 AM
Hi A.Alekseev,
Fine .Thanks a lot.How to activate this 3DES key?Please send me any link or guide me how to activate the 3DES key?
Best Regards,
S.Venkataraman
07-14-2008 02:07 AM
request 3des license
you will get activation-key
follow the instructions
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide