Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IPSec Virtual Tunnel Interface and Policy-Based Routing

Hello,

I have read the feature guide "IPSec Virtual Tunnel Interface"(http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/gtIPSctm.html) and I have some questions:

IPsec packet flow into the IPsec tunnel is illustrated in Figure 3(http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/gtIPSctm.html#wp1047929). If I configure different PBRs for inside interface,outside interface and VTI in what sequence they will be looked up?

Regards,

Aleksei

2 REPLIES
New Member

Re: IPSec Virtual Tunnel Interface and Policy-Based Routing

Policy-based routing includes a mechanism for selectively applying policies based on access list, packet size or other criteria. The actions taken can include routing packets on user-defined routes, setting the precedence, type of service bits, etc.

Policy routing is specified on the interface that receives the packets, not on the interface from which the packets are sent.

This explains about the policy based routing with an example:

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009481d.shtml#intro

New Member

Re: IPSec Virtual Tunnel Interface and Policy-Based Routing

sadbulali,

Thanks for your reply. I have read this before.

Could you look at Figure 3 and answer my question?

1403
Views
0
Helpful
2
Replies