I am trying to configure a VPN tunnel for a vendor. I can connected to the VPN, but I am unable to gain access to the internal resources. When I ran packet tracer using one of the IP addresses in the VPN pool to the IP of one of the outdie resource I am getting the following error message: (acl-drop) Flow denied by configured rule.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...