Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IPSEC VPN betwwwn ASA and ISA server problem

Hi all, thank u for your help.

I tried to establish Ipsec vpn b/n ASA and ISA server, but i have got the following error:

[IKEv1]: Group = x.x.x.x, IP =
x.x.x.x, Can't find a valid tunnel group, aborting...!
Sep 20 05:56:15 [IKEv1]: Group = x.x.x.x, IP = x.x.x.x, Removing peer
from peer table failed, no match!
Sep 20 05:56:15 [IKEv1]: Group = x.x.x.x, IP = x.x.x.x, Error: Unable
to remove PeerTblEntry
Sep 20 05:56:15 [IKEv1]: IP = x.x.x.x, Header invalid, missing SA payload!
(next payload = 4)

The security life time is the same on both sides.

Any help please

2 REPLIES
Cisco Employee

Re: IPSEC VPN betwwwn ASA and ISA server problem

Hi,

It seems like you do not have a tunnel-group configured with the ISA server's public IP address. Please check the output of "show run tunnel-group" from the ASA. If the ISA's IP address is a.b.c.d, you should see the below:

tunnel-group a.b.c.d type ipsec-l2l

tunnel-group a.b.c.d ipsec-attributes

pre-shared-key PSK

Please aste the output here.

Thanks and Regards,

Prapanch

New Member

Re: IPSEC VPN betwwwn ASA and ISA server problem

Thank you Prapanch,

Now its working i changed the tunnel-group name with the remote ip address and it works.

previously it was tunnel-group remotevpn, and now i changed tunnel-group a.b.c.d

Thank you fro your help,

Mulu

540
Views
0
Helpful
2
Replies