cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1179
Views
0
Helpful
1
Replies

IPSEC VPN from SRP521 Dynamic IP to ASA5505 Static IP

PANichols
Level 1
Level 1

Hi,

I'm having problems configuring an IPSEC VPN between an SRP521 with a dynamic IP and a ASA5505 with a static IP.

Static to Static is fine between these devices and I can configure that without problems. Dynamic to Static however...

Does anyone know if it's possible, or have an example configuration?

Thanks,

Paul

1 Reply 1

Jennifer Halim
Cisco Employee
Cisco Employee

With dynamic IP, the SRP521 end needs to initiate the tunnel, and the ASA needs to be configured with dynamic map.

here is sample configuration on the ASA for your reference:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807ea936.shtml

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: