Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

is eazy vpn client is only supported on 800 series routers for pix 7.0 ios

i am trying eazy vpn with pix 7.0.4 ios with a 3640 router. the 3640 router is as aeazy vpn client . and the pix as the eazy vpn server. the client get connected and keeps on asking the xauth parameter. i read in the release notes that that eay vpn requires 12.2 and above secure ios for 806 routers. does the pix also support eaxy vpn client routers fo 800 series only. help required urgent. if this true then pix sucks big time. they are forcing us to buy routers.they are becoming like microsoft. pls help

sebastan

1 ACCEPTED SOLUTION

Accepted Solutions
Gold

Re: is eazy vpn client is only supported on 800 series routers f

According this document

http://www.cisco.com/en/US/products/sw/secursw/ps5299/index.html

Cisco Easy VPN Remote is now available on Cisco 800, 1700, 1800, 2800, 3800, and UBR900 Series routers, Cisco PIX 501 and 506E security appliances, and Cisco VPN 3002 Hardware Clients.

So no support for 3640 ...

M.

Hope that help, rate if it does

4 REPLIES
Gold

Re: is eazy vpn client is only supported on 800 series routers f

According this document

http://www.cisco.com/en/US/products/sw/secursw/ps5299/index.html

Cisco Easy VPN Remote is now available on Cisco 800, 1700, 1800, 2800, 3800, and UBR900 Series routers, Cisco PIX 501 and 506E security appliances, and Cisco VPN 3002 Hardware Clients.

So no support for 3640 ...

M.

Hope that help, rate if it does

New Member

Re: is eazy vpn client is only supported on 800 series routers f

here's my config

my pix is connected acting as a easy vpn server with a webserver connected on the inside interface. the inside interface ip address is 10.1.1.1/24 and the ip address of the web server is 10.1.1.2/24.

the pix outside interface is connected to a 3640 router acting as a easy vpn client.

pix outside interface ip is 1.1.1.1/24 and the interface ip of the router is 1.1.1.2/24.

the 3640's other ethernet interface ip is 20.1.1.1/24 connected a host on 20.1.1.2/24.

i am using pix ios 7.1.2 and 3640 router is having 12.4(5) secure ios.

username cisco password cisco

crypto dynamic dynmap cisco 10 set transform-set cisco

crypto ipsec transform-set cisco esp-des esp-sha-hmac

crypto map cisco ipsec-isakmp dynamic dynmap

crypto map cisco interface outside

isakmp identity address

isakmp enable outside

isakmp policy 1 authentication pre-share

isakmp policy 1 encryption 3des

isakmp policy 1 hash md5

isakmp policy 1 group 2

isakmp policy 1 lifetime 86400

tunnel-group cisco type ipsec-ra

tunnel-group cisco general-attributes

authentication-server-group LOCAL

default-group policy cisco

tunnel-group cisco ipsec-attributes

pre-shared-key cisco

group-policy cisco internal

group-policy attributes

nem enable

password-storage enable

config on the 3640 router

crypto ipsec client ezvpn cisco

group cisco key cisco

peer 1.1.1.1

mode network-extension mode

username cisco pass cisco

int e0/0

ip add 1.1.1.2 255.255.255.0

crypto ipsec client ezvpn cisco outside

no shutdown

int e0/1

ip add 20.1.1.1 255.255.255.0

no shutdown

crypto ipsec client ezvpn cisco inside

the router is all the time prompted for

crypto ipsec client ezvpn xauth

i put in the username and password

but it still keeps on asking the same. i have done my config from a cisco configuration example.

i tried the same with pix ios 6.3 it works fine. pls help me out if possible. i have spend a entire night over this. thank u for ur response. waiting for ur reply.

sebastan

New Member

Re: is eazy vpn client is only supported on 800 series routers f

hi there i used this same router with pix ios version 6.3 but it still worked fine.even 2600 series router worked fine as a easy vpn client. the list of easy vpn clients u have given is it in respect with pix 7.0 ios.

can u pls a geta list of ios routers that are supported as easy vpn clients with pix 7.0 ios. pls help . thank u once again .waiting for ur reply.

sebastan

New Member

Re: is eazy vpn client is only supported on 800 series routers f

Hi,

I meet the same problem as you :

ezvpn on pix v7 and C2800 as ezvpn client:

ask me username and passwor

Do you success in solving your problem?

Thanks

133
Views
0
Helpful
4
Replies