Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Issue setting up ASA 5510 L2L

Having errors connecting a simply L2L VPN between Linksys and the 5510. will attach running config and debug files. Any input would be helpful.

Thanks

Ron

6 REPLIES
Silver

Re: Issue setting up ASA 5510 L2L

This is bug ID: CSCsb82618

Do you have 7.1 Version?

See on : http://www.cisco.com/en/US/docs/security/pix/pix71/release/notes/pixrn711.html

Regards,

Dharmesh Purohit

Silver

Re: Issue setting up ASA 5510 L2L

You can see all are error massage on below url:

http://www.cisco.com/en/US/docs/security/asa/asa70/system/message/logsev.html

Regards,

Dharmesh

New Member

Re: Issue setting up ASA 5510 L2L

Looks like I am running version 7.0(6) new out of the box. I could download the latest Image however it looks like I will forego using my two SSL license's that I was going to test with :(

Regards,

Ron

New Member

Re: Issue setting up ASA 5510 L2L

After updating to asa 7.2 I am getting this error from debug cmd debug crypto isakmp

Aug 28 23:40:20 [IKEv1]: IP = 69.137.178.185, Removing peer from peer tab

le failed, no match!

Aug 28 23:40:20 [IKEv1]: IP = 69.137.178.185, Error: Unable to remove PeerTblEnt

ry

Regards,

Ron

Green

Re: Issue setting up ASA 5510 L2L

Ron,

Would you mind posting a clean config from the ASA?

New Member

Re: Issue setting up ASA 5510 L2L

I contacted Tac and was able to figure out that the Linksys VPN side of the tunnel was not routing back through the tunnel correctly. I have since wiped the Linksys configuration and reconfigured it with successes.

regards,

Ron

162
Views
0
Helpful
6
Replies