Issue with Cisco VPN client connecting to Watchguard X10e-w firewall
I'm having difficulty getting our client workstations connected to our Watchguard firewall. The client workstations are all running XP Pro SP2 with the Cisco VPN Client 4.6.03.0021 and are trying to connect to a Watchguard X10e-w firewall running version 10.2.3. I've looked for a document from either Cisco or Watchguard on the correct setup but haven't been able to find anything. I did find a couple of posts here that covered connecting Cisco VPN clients to 700 series Watchguard firewalls but the options are completely different.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...