Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Juniper Netscreen SSG20 connected directly to Cisco PIX 525.

Hi All, I have a third party vendor that needs to put a Juniper SSG20 VPN device into our network. I'd like to plug it into a PIX 525 directly. Anyone attempt the same thing,? Any issues I should be careful of?

I am attaching a diagram of the proposed layout.


Thank you.

dmitry

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Juniper Netscreen SSG20 connected directly to Cisco PIX 525.

Shouldn't be a problem as long as you know what protocol and ports Juniper use so you can open it on the PIX 525 ACL.

2 REPLIES
Cisco Employee

Re: Juniper Netscreen SSG20 connected directly to Cisco PIX 525.

Shouldn't be a problem as long as you know what protocol and ports Juniper use so you can open it on the PIX 525 ACL.

New Member

Re: Juniper Netscreen SSG20 connected directly to Cisco PIX 525.

Thank you.

603
Views
0
Helpful
2
Replies
CreatePlease to create content