I have been working on setting up a site to site VPN connection across a 4G network and ran into quite a few issues(specifically it doesn't stay established for very long). I've tested this same configuration in a lab environment with no issues, so I believe if it was across a more typical WAN connection there wouldn't be an issue. Is anyone aware of special configuration that needs to be done across 4G networks? I currenlty have my MTU set at 1350 per the vendor recommendation, but that is really the only "special" configuration changes I've made.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...