Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

L2L VPN Static to Dynamic with Redundancy

Hi i have IPSEC VPN configured between two Cisco Routers.

one end Dyamic , head End Static. and it works like a charm,

Now what i want to acheive is.

If my Head end goes down, i want Remtoe End to connect to scond Head end.

is that possible?

currently on my Remote end, i have configured this way ( Partial configuration )

crypto map vpn 10 ipsec-isakmp

set peer 8.2x.1x.4

set transform-set weak

match address 100

what i want is if 8.2x.1x.4 is unreachable, then VPN gets connected to second head end lets say 1.1.1.1

any help would be great.

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: L2L VPN Static to Dynamic with Redundancy

Hello Ahmad,

Yes it is possible.

You set primary peer as your default and so, the default peer will be always prefered.

http://www.cisco.com/en/US/docs/ios/security/command/reference/sec_s2.html#wp1046908

thanks

Rizwan Rafeek

2 REPLIES

Re: L2L VPN Static to Dynamic with Redundancy

Hello Ahmad,

Yes it is possible.

You set primary peer as your default and so, the default peer will be always prefered.

http://www.cisco.com/en/US/docs/ios/security/command/reference/sec_s2.html#wp1046908

thanks

Rizwan Rafeek

New Member

L2L VPN Static to Dynamic with Redundancy

thanx

315
Views
0
Helpful
2
Replies