Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

L2TP

Hi

This is my first time to aks you a question.I'm expecting for your response.

my question is :

our company use a L2TP access applition. there are about several thousands of terminal dial in using l2TP protocol . in order to the security and reliability, which model router(e.g 2800 or 7200) is the best choice for this application as LNS. we can take more than one router to make this role to reduce the risk, but we hope one router can accept at least 500 L2TP connections. the connections is keep up always.

Thanks

James

3 REPLIES
New Member

Re: L2TP

Hi,

in an ISP enviroment the cisco 7200 is used. I tested it with 1500 l2tp tunnels. With a NPE-G1 the cpu has 35%.

Regards, Celio

New Member

Re: L2TP

Hi

first,thanks for your information

and I have more question. If I use the CISCO 2800, what limitation and risk will it appear contrast with using CISCO 7200 ?

have you make the test or have the experience of use CSICO 2800 to take the LNS ?

Thanks

James

New Member

Re: L2TP

Hi,

currently I have no performance data for the 2800. But from IOS perspective you can also use the 2800 as LNS.

Regards, Celio

124
Views
0
Helpful
3
Replies