Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

LAN-2-LAN tunnel ACL

How can I assign an ACL to an existing LAN-2-LAN tunnel. I want to limit traffic through the tunnel down to a specific IP address and TCP port?

6 REPLIES
Hall of Fame Super Blue

Re: LAN-2-LAN tunnel ACL

Hi

Which device and what version of software are you running on that device ?

Jon

Community Member

Re: LAN-2-LAN tunnel ACL

ASAs on both ends with IOS ver 7.2

Hall of Fame Super Blue

Re: LAN-2-LAN tunnel ACL

Easiest thing to do would be to use a vpn-filter on the L2L tunnel. Please see attached link for details

http://cisco.com/en/US/docs/security/asa/asa72/command/reference/uz_72.html#wp1411607

HTH

Jon

Silver

Re: LAN-2-LAN tunnel ACL

You can use Policy NAT and access-list.

Thanks,

Dharmesh

Silver

Re: LAN-2-LAN tunnel ACL

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807f9a89.shtml

See on above link, it has some hint for Burst size.

Thanks,

Dharmesh

Community Member

Re: LAN-2-LAN tunnel ACL

Resolved the issue myself ... Thanks everyone

181
Views
0
Helpful
6
Replies
CreatePlease to create content