Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Lan-to-Lan in VPN Cluster

hi,

I have configured a VPN Cluster on two 3030 Concentrators, my VPN Clients both IPSec and PPTP are successfully connecting to the concentrator but the LAN-to-LAN.

my question is do i have to connect to the cluster ip or the physical concentrator ip of one of the cluster concentrator.

2 REPLIES
Silver

Re: Lan-to-Lan in VPN Cluster

Load balancing is effective only on remote sessions initiated with the Cisco VPN Client (Release 3.0 and later) or the Cisco VPN 3002 Hardware Client (Release 3.5). All other clients, including LAN-to-LAN connections, can connect to a VPN Concentrator on which load balancing is enabled, but they cannot participate in load balancing.

New Member

Re: Lan-to-Lan in VPN Cluster

thanks for the reply dear...

dear i have switched to VRRP from loadbalancing...as my client was having more lan2lan tunnels than remote sessions.

thx again...

124
Views
3
Helpful
2
Replies
CreatePlease login to create content