Lan to Lan tunnel between Juniper SSG5 and Cisco 3005 concentrator

[thomuff]

Does anyone have a configuration example?

or have you successfully established a tunnel between these two devices? or between SSG5 and Cisco ASA 5520?

[ajagadee]

Thomas,

Since, both the devices support the IPSEC RFC, you should be able to build the ipsec tunnel between them.

Below is a URL that has information on Configuring IPSec LAN-to-LAN tunnel between the Cisco Pix Firewall and a NetScreen Firewall. Eventhough, this is for a Pix, it should help you on the Netscreen side. Also, below is another URL between Pix and VPN3000. By comparing both the URLs you should be able to build a tunnel between the VPN3000 and Netscreen.

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801c4445.shtml

LAN-to-LAN IPSec Tunnel Between the Cisco VPN 3000 Concentrator and PIX Firewall Configuration Example

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00800949d2.shtml

Regards,

Arul

*Pls rate if it helps*

[thomuff]

We figured it out. Local Network configuration was not matching SSG configuration. Thanks for your reply.