Having intermittent issues where a l2l tunnel will come up and have traffic in only one direction. l2l tunnels are between a 5510 and one of my 5505's. Restarting the 5505 seems to have no effect.The tunnel us set up so that it can be brought up by either end.
I have re-created the tunnel in question on the 5510 but the only thing that seems to bring it back is to restart the 5510.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...