Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

LAN to LAN VPN betwwen 2801 & VPN Conc.3060

Hello,

Iam trying to connect through ADSL to a VPN Concentrator with a Cisco 2801.

Could anybody please help me with the following message that router displays when I am trying to initiate the tunnel:

*Sep 30 06:31:22.552: %SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr=64882E14, count=0

-Traceback= 0x60EE7B8C 0x602D7888 0x602D913C 0x602E1390 0x61A4198C 0x602E14AC 0x613D5E38 0x613D60D8 0x62377174 0x62377740 0x6237786C

*Sep 30 06:31:22.552: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=64882E14, count=0

-Traceback= 0x60EE7B8C 0x602D3EA4 0x602D9344 0x602E1390 0x61A4198C 0x602E14AC 0x613D5E38 0x613D60D8 0x62377174 0x62377740 0x6237786C.

*Sep 30 06:31:24.552: %SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr=64883888, count=0

Although the tunnel seems to works fine as seen from the "show crypto isakmp sa"

dst src state conn-id slot status

213.249.51.55 10.4.13.19 QM_IDLE 1 0 ACTIVE

.

Applying the error to Error Message Decoder it says "A reference count is used to track the usage of many data structures...contact your Cisco technical support representative..."

4 REPLIES
Gold

Re: LAN to LAN VPN betwwen 2801 & VPN Conc.3060

there are many possibilities. how about you post the config here, and we can have a look.

New Member

Re: LAN to LAN VPN betwwen 2801 & VPN Conc.3060

I would like to thank you for your reply,

I just found that the solution in my problem was the IOS.I tryied many IOS with no result, that is why I posted the problem.I tryied more and more and I found the correct one.

Thanks for your time.

Gold

Re: LAN to LAN VPN betwwen 2801 & VPN Conc.3060

it's good to learn that the issue has been resolved. would you mind post the working ios version? so that more ppl as well as cisco will be aware. thanks in advance.

New Member

Re: LAN to LAN VPN betwwen 2801 & VPN Conc.3060

The working IOS to the problem is :

12.3(14)T4

Regards.

210
Views
0
Helpful
4
Replies
CreatePlease to create content