cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
667
Views
0
Helpful
2
Replies

LAN to LAN VPN through MPLS

siddhartham
Level 4
Level 4

Capture.JPG

We have 2 sites HQ and Remote connected with MPLS as in the above picture.There are applications in DMZ s that need to talk to each other but the communication is going through the LAN (Remote DMZ- HQ LAN - HQ DMZ) but we don't want the DMZs talk to each other through the LAN.We want to configure a VPN tunnel between HQ and Remote Firewalls so that all the communication between the DMZs go through a VPN tunnel through MPLS through the LAN. Is this considered as a Layer2 VPN or the Layer 3 VPN model and also is there any special configuration that needs to be done on the firewalls other than normal site-site VPN config.

Thanks

Siddhartha
1 Accepted Solution

Accepted Solutions

Jennifer Halim
Cisco Employee
Cisco Employee

It is Layer 3 VPN and no special configuration required on the firewall other than the normal site-to-site VPN. Just have to enable the isakmp and apply crypto map to the LAN interface.

View solution in original post

2 Replies 2

Jennifer Halim
Cisco Employee
Cisco Employee

It is Layer 3 VPN and no special configuration required on the firewall other than the normal site-to-site VPN. Just have to enable the isakmp and apply crypto map to the LAN interface.

Thanks Jennifer.

Siddhartha
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: