Re: Local Lan access disabled after vpn tunnel established w/ re
Based on your description you said that peers in sister company vpn into their network they have local-lan access but when you vpn into their network you do not have local-lan access?
In your VPN client make sure you have local LAN access enabled in the transport tab under the tunnel name profile properties.
Also which VPN gateway in sister company do you connect, you indicate they have PIX515 and ASA , are they using both devices as VPN gateways ? if so perhaps they have once gateway as full tunnel and other to allow local lan access policy of split tunneling .
As for your end 2801 router you probably need to configure split tunnel for RA to have local LAN access
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...