I have an old VPN Concentrator 3002 and a brand new MAC os11.
I am using the inbuilt MAC VPN which seems easy to setup ...however when I connect to the concentrator I fail IKE 1 straight away. I know this shared secret and group ar eright as I do connect from any windows based machine with the same credentials.
I havent created a new MAC usergroup on teh concentrator as believe the windows based group should still work ?
Dont really want to default to cisco client on the MAC if i dont have to.
Has anyone else experienced this or have any suggestions?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...