Major use Public Server Rules and NAT Rules in Cisco ASA 5585
We have Cisco ASA 5585 Firewall in our Network, it is working fine but when we were going to understand all rules then we found here some confusion between Public Server rules and NAT Rules, Because here some rule are same in Public Server rules and NAT Rules.
Please help us to get this understand in better way.
There is no problem that some rules can be used at access and at the NAT, because you can give specific rules for NATing (for example I want use NAT for access from this host to that server but I don't want to use NAT for traffic from this host to that host).
If you want specific explanation for the parts that you can't undenstand then put this part of configuration here.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...