Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

migration from PIX to ASA 5510

i have a PIX 505 series, and i want to upgrade to ASA 5510 series. the IOS on the PIX is 7.2 version. do i copy and paste the CONFIG of the PIX into the ASA or i have to modify some rules in the CONFIG of the PIX ?

thanks

1 REPLY

Re: migration from PIX to ASA 5510

If they were the same exact model and code I would say yest but they are not. Even if the ASA5510 has the same code as the 505 they are not the same hardware platform. Take under consideration the physical interfaces, and any other configuration on the 505 to cary onto the 5510.

I would configure the ASA 5510 offline from scratch following the IP interface configuration, rules, nating etc.. specs from the 505.. load both PIXs using ASDM if nessesary to make the configuration easier on the new one, once fully configured come up with an implementation plan to swap the firewalls.

288
Views
0
Helpful
1
Replies
CreatePlease login to create content