Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Monitoring PIX Outside Interface ( SNMP) through VPN tunnel

Hi,

We are in the Implementation stage between Site to Site Tunnel, we have PIX 6.3(5) both ends and had configured the Site to Site Tunnel working fine. We need to Monitor the other end PIX by SNMP. We already refered the below URL for the config. We need your help on any MIBs or which SNMP version will support PIX outside Interface.?? How to debug while SNMP query.?

URL referred :

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094a13.shtml

Regards

Karuna

919900541331

1 REPLY
Green

Re: Monitoring PIX Outside Interface ( SNMP) through VPN tunnel

Not sure if you've already got snmp working through the tunnel but here is the config anyway.

All you need to do is add the outside interface to the interesting traffic acl's on the pixes. Assuming pix to be monitored is pix 1 and outside address is 1.2.3.4, snmp server is 5.6.7.8 behind pix 2.

PIX 1

access-list 101 permit ip host 1.2.3.4 host 5.6.7.8

PIX 2

access-list 101 permit ip host 5.6.7.8 host 1.2.3.4

access-list 102 permit ip host 5.6.7.8 host 1.2.3.4

nat (inside) 0 access-list 102

209
Views
0
Helpful
1
Replies
CreatePlease to create content