Multi-Subnet VPN

[jmalloy22]

I have an ASA 5505 and 5510 connected via IPSec L2L VPN. The 5505 has a single 192.168.15.x subnet on Eth0/1, while the 5505 has 10.101.10.x and 172.30.10.x subnets on Eth0/1 and Eth0/2 respectively. With the current VPN I can access 10.101.10.x from 192.168.15.x and vice versa. What I can not figure out is how to access 172.30.10.x from 192.168.15.x over the existing VPN. Any thoughts...?

[Collin Clark]

You'll need to add the other subnet into NAT0 and the crypto ACLs. Here's a link to a configuration guide.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807f9a89.shtml

Hope it helps.