I need to know if there is any way to configure a filtering of (*,G) mroutes within the Default or Data MDT. The point is that I want to configure within a VRF a Regional RP within certain groups that can be reachable only within that region, and a Corporate RP with different groups that are reachable in all the network. If I have different" IP PIM VRF XYZ RP" configurations among the different PEs I get the error: "%PIM-6-INVALID_RP_JOIN: VRF", so I need to have an homogeneous configuration of PEs (in terms of RP within each VRF) along the whole network.
I will appreciatte if anyone can give me some advise on how to configure this kind of regionalization.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...