I have 2 spokes that get NATed onto the same public IP address. The spokes both get their external IP from the same dhcp pool. Both spokes have separate configs and internal IP ranges and work fine on their own.
#1 works fine, but if #2 is turned on the connection is lost on #1 (vpn light stays on), once #1 recovers (20-40min) #2 loses connection and the game repeats.
I have no control over the dhcp ranges or the NAT router.
Yeah, the way i figure the hub IDs the spokes based on IP. Is there a way around this behavior as I don't have access to the NAT router. I'm going to run into other events in the future where I'm going to be presented with similar provided NAT setups and based on event restrictions (network, space, location, etc) have to use multiple DMVPN routers.
Show Name: Thoughts on Security at Cisco Live US 2018 in Orlando
Contributors: Kevin Klous, David White Jr., Aaron Woland, Jeff Fanelli
Posting Date: June 2018
Description: The team goes on-site in the Cisco Live Speaker room in...
RADIUS and Symantec VIP.
I will use screenshots of ASDM, and at the end I will add the required CLI commands. the diagram below show a diagram of the steps the FW goes through when using 2FA authentication:
As you can see in Fig. 1&nbs...