Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Multiple outbound VPN thru PIX 506E

I have a PIX 506E running 6.3(3).

We have about 10 internal users who do a mixture of outbound Cisco VPN IPSec connections and Microsoft PPTP connections. It is possible that there are multiple IPSec connections to the same remote site.

I am using the attached configuration.

1) Is correct to use an IP Pool for outbound VPN?

2) I cannot get to the internet with the current config. What is wrong?

Thank you very much.

Tom

2 REPLIES
New Member

Re: Multiple outbound VPN thru PIX 506E

Disable this command:

route outside 0.0.0.0 255.255.255.0 71.164.145.1 10

But keep route 0.0.0.0 0.0.0.0 71.164.145.1 10

Mike

Silver

Re: Multiple outbound VPN thru PIX 506E

Remove this route it is incorrect:

no route outside 0.0.0.0 255.255.255.0 71.164.145.1 10

As for the PPTP microsoft VPN you need to add

fixup protocol pptp 1723

You can have PPTP and IPSEC through PIX no problem.

Let me know this helps,

153
Views
0
Helpful
2
Replies
CreatePlease to create content