Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Multiple site-to-site + remote access

Is it possible to have many site-to-site VPN connections established from main office to branch offices and allow remote users to connect with Cisco VPN client at the same time to the router in a branch office? I have Cisco 800 series routers (892) in the main office.

Thanks for any suggestion, link...

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Multiple site-to-site + remote access

Hello Jernej,

If you have a c8xx router in the branch as well, then the scenario you've described

is possible.

See here an example :

Configuring an IPsec Router Dynamic LAN-to-LAN Peer and VPN Clients

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801dddbb.shtml

Basically you can set multiple entries in a crypto map, both for lan to lan and remote access.

br

-istvan

2 REPLIES
Cisco Employee

Re: Multiple site-to-site + remote access

Hello Jernej,

If you have a c8xx router in the branch as well, then the scenario you've described

is possible.

See here an example :

Configuring an IPsec Router Dynamic LAN-to-LAN Peer and VPN Clients

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801dddbb.shtml

Basically you can set multiple entries in a crypto map, both for lan to lan and remote access.

br

-istvan

Re: Multiple site-to-site + remote access

Thank you Istvan - this is just what I was looking for.

There are snapgear routers in branch offices but that shouldn't make any problems (I hope ).

There is http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094685.shtml another link that is useful.

373
Views
0
Helpful
2
Replies
CreatePlease to create content