Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Multiple VPN WAN Ports

Is there any way to configure a router (1921) where vpn clients can establish a connection to either of 2 WAN ports (different ISP's)?

Everyone's tags (3)
New Member

Yes, it is very much possible

Yes, it is very much possible,. creating separate Remote access vpn policies and binding it to the 2 wan ports.

Cisco Employee

There's a lot more options

There's a lot more options depending on your configuration and uplinks to ISPs :-)

DVTI way is what might same you a bit of redundant configuration.

New Member

how to bind the policies to

how to bind the policies to the 2 separate ports proved difficult (they also appeared to need there own seperate routing table).

New Member

well after exhaustive efforts

well after exhaustive efforts to create this setup on our 1921 router, we have went another route.  It appeared that the only way to accomplish this was through some sort of VRF type setup and after failed attempts by a CCIE/CCNP and CCNA to achieve this we decided to use a secondary appliance.  It would be nice to know how this is possible (as Cisco and others have claimed it is) through some sort of sample config (which I have yet to find; which is interesting b/c you would think i'm not the first one who needed this type of config).  Thank you for your answers and advice.


CreatePlease login to create content