Hi guys we have a customer called BPS and it has two servers 192.168.10.15 and 16.....we have 10.0.0.0/16 netwrok which connects to the two servers over VPN (IPSEC) we have pix firewall......follwoing is the config output
I can see that we have static NAT for these two servers and then we are PATTing to the 10.0.0.1 (all 10.0.0.0/16 address)
my question is how this work............my forewall ip outside is X.56.24.3 (suppose)
how this NAT is working i need the order ie when 192.168.10.15 comes it address will nbe changed on outside interface to 10.1.1.49 or when it treverse through internal it will get changes similarly how NAT is processed when packet goes outsdoe as well
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...