Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Nat for vpn

Hi Everyone,

I having trouble configuring asa5520 using asdm 6.0.I need to nat  the ips below those belong to the public ip pool of 95.170.208.0/27 to 172.18.8.0/24

but as you see the interfaces below theres no interface with 172.18.8.0 network. What do you think I should do next ?

- 95.170.208.6  <->172.18.8.0/24
- 95.170.208.7  <->172.18.8.0/24
- 95.170.208.8  <->172.18.8.0/24
- 95.170.208.9  <->172.18.8.0/24
- 95.170.208.10 <->172.18.8.0/24
- 95.170.208.11 <->172.18.8.0/24

GigabitEthernet0/0          Backup                   192.168.100.254

GigabitEthernet0/1          Inside                      192.168.50.1

GigabitEthernet0/2          Internet-Backup      192.168.60.1

GigabitEthernet0/3          Wan-Direct             95.170.208.3

Management0/0              Manage                   192.168.1.1

Everyone's tags (5)
1 REPLY

Re: Nat for vpn

Hi

When u select the NAT feature using ASDM dont you see an option to add network object ? You can make use of that option to create 172.18.8.0/24 and select to create the NAT rule.

But do make sure that you have proper route/acess permissions enabled to reach 172.18.8.0/24.

regds

517
Views
0
Helpful
1
Replies