Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NAT peer network on ASA

We have a requirement to NAT every site-to-site VPN host into a specific range of IPs. For example, A remote host is 10.1.1.200, we need to NAT this on our ASA to 172.24.202.1 through to the destination network.. This needs to be a 1-to-1 static nat for inbound and outbound communication to our network. Does this only require a static (inside,outside) along with static (outside,inside) or is there more that is needed? Any help is greatly appreciated.

1 REPLY

Re: NAT peer network on ASA

Rob, if other side of tunnel expect 10.1.1.200 to be seen as 172.24.202.1 as far as I know it only requires one to one static nat ranslations, then the regular site-to-site vpn usual crypto configuratios and access-list.

116
Views
0
Helpful
1
Replies