Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

NAT Question

We have ASA 5510, running IOS 8.2(4).  We are setting up two VPN pools for Cisco VPN client.  Do we need to setup each NAT statement for each VPN pool?  How do we setup the NAT statement for the second VPN pool?

Below is my current config:

ip local pool itvpnpool 209.145.101.65-209.145.101.78 mask 255.255.255.240
ip local pool vpnpool 10.10.8.1-10.10.15.240 mask 255.255.248.0

nat-control
global (Outside) 1 interface
nat (Outside) 1 10.10.8.0 255.255.248.0

Thanks.

Diane

1 REPLY

NAT Question

Diane,

What are you trying to do here exactly?

232
Views
0
Helpful
1
Replies
CreatePlease to create content