We have a new ASA 5510. We are not sure of the basic configurations. We want to use the ASA as a firewall and VPN. For the VPN, we are going to setup group policies for the VPN client. There is no router between the ASA and the internal networks. Here is the basic configuration. Do you see anything wrong? Is there anything else that we need to setup in terms of routing?
1. The outside IP address is 18.104.22.168, network mask 255.255.255.248, gateway 22.214.171.124. Is this what we would enter on the Outside interface?
interface Ethernet0/0 nameif Outside security-level 0 ip address 126.96.36.199 255.255.255.0
2. We want to NAT each private IP address to each public IP address. The public IP addresses are from 188.8.131.52 - 184.108.40.206, subnet mask 255.255.255.192. Are these the correct NAT statements?
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...