Re: New VPN setup for ASA5505 - Getting from the Internet to the
I configured the ZyXel for bridge mode and proceeded with the pppoe setup on the ASA.
The outside vlan got an IP, but I couldn't get out from the inside vlan.
A call to my DSL provider to see if there was a pppoe username and password revealed that they have moved away from pppoe and only provide DHCP or static IP service.
I configured outside to obtain an IP using DHCP and checked the box to configure the default route and everything worked.
Now I'm on to getting the VPN connection working (connecting from home to the ASA). I can connect using the VPN client but cannot see any resources on the inside vlan. Nothing is pingable, including the ASA.
My router at home was using the same subnet range as the inside vlan (192.168.1.x), so I changed the home router to use 192.168.10.x but still no luck. I am receiving an IP from the inside vlan's DHCP pool.
I am wondering if the following is what I need:
access-list Local_LAN_Access permit ip 192.168.10.0 255.255.255.0 192.168.1.0 255.255.255.0
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...