I am having a problem with my 2821. I am trying to have my connecting cleint on VPN use a dhcp scope on a windows 2003 server. If I have the cleint connect with a fixed ip everything works fine. However when you ask to use a dhcp address the client times out getting an address.
The DHCP server serves up address to the rest of the network fine just not to VPN cleints. The cleints are using the native window Cleint
Here is the config on the router:
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
boot system flash c2800nm-adventerprisek9_sna-mz.124-23.bin
As you can see it does get an ip but does not send it to the host. Also every cleint shows up as the routers name instead of the computers name. The mac address seems to be wrong too. I am at a bit of a loss on this one.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...