10-23-2008 01:15 AM
Hi,
I have configured Remote Access vpn on ASA 5510. The users can connect to the internal lan.but unable to access the internet simultaneously.
10-23-2008 01:56 AM
Have you enabled split tunneling? Read the below config example:-
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml
Are you encrypting ALL traffic over the VPN? Read the below config example:-
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805734ae.shtml
HTH>
10-23-2008 02:47 AM
yes i have tried to enable the split tunneling in the below order is it correct
group-policy anid-remoteaccessvpn attributes
dns-server value 192.168.30.1
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value acl_anid-remoteaccessvpn
10-23-2008 02:49 AM
OK - but do the users local DNS server IP address, overlapp with your split-tunnel encryption domains?
10-23-2008 02:55 AM
I dont think so let me verify
10-29-2008 12:15 PM
Can the split tunneling work if my users just use windows pptp to connect instead of the Cisco VPN client?
10-29-2008 03:44 PM
AKAIK - no.
10-29-2008 09:32 PM
Thanks for the urls. now i am able to connect to the internet using client vpn
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: