I tried to set access hours on both remote access and Lan-2-Lan VPNs on our ASA5510, version 7.0.4. I did this by defining a time range and applying it to the group policy. On the remote access VPNs it works, but on the L2L VPN it doesn't work. The tunnel can be established outside the time range, and the tunnel is not disconnected when the time range expires. Has anyone had similar experiences?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...