Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

on PIX 506E (VPN site to site and VPN client)

Dear All,

could you let me know!!!

i would like to ask you about pix 506E and i want to do VPN client and VPN site to site. i mean only one box this both VPN.

Do you have any simple configuration on this?

Please advice me!!! :)

Best Regards,

Join

3 REPLIES

Re: on PIX 506E (VPN site to site and VPN client)

Silver

Re: on PIX 506E (VPN site to site and VPN client)

You have to configure first internet connectivity by simlet PAT,

global (outside) 1 {IP add}

NAT (inside) 1 (inside subnet)

Onc eit is done, access PDM if you have then configure IPsec by GUI.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702992.shtml

Use same outside interface IP address for VPN client, You will save one IP address.

let me know if you need further help.

Thanks,

Dharmesh Purohit

Community Member

Re: on PIX 506E (VPN site to site and VPN client)

Dear Farrukh,Dharmesh,

Thanks you for your advice, :)

Please see in the attach file. i configured VPN site to site already. and i would like to do one more VPN client but when i do VPN client the VPN site to site is down. this is PIX Version 6.3(5)

Could you advice some command on VPN client and VPN site to site.

Best Regards,

join

416
Views
0
Helpful
3
Replies
CreatePlease to create content