Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

OSPF problem

Hi,

I am having problem with OSPF when I configured 1 to many VPN l2l tunnel "spoke to Hubs". I am getting an error when I wanted to add another neither in the OSPF statement " ERROR: Only one neighbor allowed on point-to-point interfaces".

Nortel Contivity work fine, I think they let pass the multicat in clear through the tunnel. We are testing the ASA to replace them but I have to fix this big issue. I don't want to use static route.

I found a document in Cisco site but no mentionon of OSPF on it:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00804675ac.shtml

Any idea or advice.

Thanks

Note:

I had no issue with OSPF when I configured 1 to 1 l2l tunnel using this document:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00804acfea.shtml

2 REPLIES
Silver

Re: OSPF problem

This is a restriction on ASA 7.x, When an interface is configured as point-to-point, non-broadcast, You can define only one neighbor for the interface. Currently, only one neighbor is possible on an interface. In order to support multiple neighbors, point-to-multipoint support should be added.

New Member

Re: OSPF problem

>In order to support multiple neighbors, point-to-multipoint support should be added.

Does anyone know if there is a bug/feature request for this, I see it's still not available in 8.0.4 :(

111
Views
0
Helpful
2
Replies
CreatePlease login to create content