I have an ASA5510 that I would like to configure to allow outgoing vpn connections to other networks/customers. I am using a PAT address for all other outgoing sessions. I only seem to be able to allow outgoing vpn connections if I statically map public IPs' to internal Private IP's then allow incoming GRE to the public ip.
There must be an easier way that doesn't require static IPs.
You can limit remote access VPN users to only the areas of the network that you want them to access when you Create access lists and associate them with group policies.Also associate those group policies with tunnel groups.
Refer the following url for more information on remote access vpn:
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...