Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

outside nat on pix 6.3(4)

I have a pat for users accessing internet. I want to do a static nat for internal web server and that this server to be seen by internal users as domain name. Can you help me about this.

I have done a:

static(outside,inside) 193.56.33.22 192.168.1.1 dns netmask 255.255.255.255 0 0

But I can see web server from inside but I cannot see it from outside.

thanks

4 REPLIES
Gold

Re: outside nat on pix 6.3(4)

depends on how many public ip you've got.

if only one,

static (outside,inside) tcp 80 80 netmask 255.255.255.255

if there are more than one

static (outside,inside) netmask 255.255.255.255

for accessing the web server from the internet, inbound acl is also required.

access-list 111 permit tcp any eq 80

access-group 111 in interface outside

New Member

Re: outside nat on pix 6.3(4)

I have one public ip address. But I want to see this web server from inside too with a domain too. Is it is possible with your static command ?

thnx

Gold

Re: outside nat on pix 6.3(4)

keep the static command and do "alias (inside) 255.255.255.255"

for reference,

http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/products_tech_note09186a0080094aee.shtml#backinfo

New Member

Re: outside nat on pix 6.3(4)

thank you for the response. I will try this but I have seen the cisco web site that there is a doc as attachment. And there is a difference.

thank you very much

127
Views
0
Helpful
4
Replies